Electrical & Electronic
Test and Measurement Tools


  • High Precision Analyzers : - Fluke Norma 4000


    Reliable, highly accurate measurements for the test and development of power electronics
    The compact Fluke Norma Series Power Analyzers provide the latest measurement technology to assist engineers with the development and testing of motors, inverters, lighting, power supplies, transformers and automotive components.
    Based on a patented, high-bandwidth architecture, the instruments deliver high-precision measurements of single or three-phase current and voltage, harmonics analysis, Fast Fourier Transformation (FFT) analysis, as well as calculations of power and other derived values.
    The Series consists of the Fluke Norma 4000 4000 Three-Phase Power Analyzer and the Fluke Norma 5000 Six-Phase Power Analyzer. These rugged, high-precision analyzers provide unmatched price performance for easy and reliable use in the field, or as a bench unit in laboratories and on test benches.

    Applications
    Electric motors and inverter drive systems – Through detailed spectrum analysis and dynamic torque calculation capabilities, switching losses caused by the inverter are accurately measured, and a thorough evaluation is made of torque transients and harmonics at higher frequencies.
    Inverter drive system – Simultaneous measurement of all electrical and mechanical power parameters in the same time window enables users to observe the influence one component has on another, or on the whole system.
    Lighting systems - A wide bandwidth of up to 10 MHz and a high sampling rate up to 1 MHz provide detailed signal analysis at ballast outputs. A unique shunt technique enables power measurements at very high frequencies. Simultaneous measurement of input and output power provides instant calculation of ballast losses.
    Transformers – Synchronous six-phase power measurements enable highly accurate efficiency and loss calculations of large power transformers even at very low power factors. Synchronous multiphase resistance measurements of transformer coils are also possible. Automotive – Synchronous electrical input and mechanical output measurements provide complete data on the efficiency and losses of individual components as well as the whole drive system.



    “Contact us to know about more models under this category”
  • Clamp Meter : Fluke 381


    Be ready for anything.
    The Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access. Safety Conformance IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV



    “Contact us to know about more models under this category”
  • Thermometer : Fluke 62 Max +


    Designed with your on-the-job needs in mind, the new Fluke 62 MAX and 62 MAX+ infrared thermometers are everything you’d expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX+ are so tough, they’re the only IR thermometers around you can handle without care.



    “Contact us to know about more models under this category”
  • Laser Distance Meters : Fluke 421 D


    The 421D offers:
    • Ability to view more data with backlit, three-line display
    • Ability to measure up to 60 m (200 ft) with increased accuracy of up to 1.5 mm (0.06 in)
    • Full Pythagoras function (determine distance indirectly via two or three other measurements)
    • Audible activation and shut down notification
    • Storage of the last ten measurements for quick recall of distance
    • Minimum and Maximum function
    • Strong environmental protection with IP54 (water spray and dust proof) sealing
    • Ability to measure up to 100 m (330 ft)
    • Storage of the last twenty measurements for quick recall of distance
    • Audible feedback for taking room angle and incremental measurements
    • ±45 ° Tilt sensor for taking indirect measurements in hard to reach areas
    • Tripod mode allows you to mount to a tripod for measuring long distances
    • Built in light sensor for activating the backlight saving battery life
    • Corner angle feature, allows you to determine the angle of a corner



    “Contact us to know about more models under this category”
  • Scope Meter : Fluke 190 Series (204)


    Fluke 190 Series II Scopemeter® Test Tools Go Where Scopes Could Never Go Before.
    As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter® 190 Series II combines an unprecedented level of performance, ruggedness, and portability. You can choose from 60MHz, 100MHz or 200MHz bandwidth models, both with real-time sampling rates up to 2.5 GS/s and 400 ps resolution to capture noise and other disturbances. Both models feature deep memory—up to 10,000 samples per channel— so you can examine very small parts of the waveform in detail. And both are IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Fluke ScopeMeter test tools are hand-held battery operated, designed to meet the demands of field service professionals.



    “Contact us to know about more models under this category”
  • Voltage Tester : Fluke LVD2


    Overview:
    Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54 cm to 12.7 cm) from the source and red when at the source.
    • Dual Sensitivity
    • LED light with 100,000 hour life
    • Detects from 90 to 600 V AC
    • Rated to CAT IV 600 V
    • Dual Levels of Detection
    • Blue indicates proximity to AC Voltage source
    • Red indicates you’re at the source
    • Operating temperature 0 deg C to 50 deg C
    • Ultra-Bright White LED
    • 100,000 hr bulb
    • AAA battery included



    “Contact us to know about more models under this category”
  • Insulation Tester : Fluke 1507


    Overview:
    The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable, and easy to use. With their multiple test voltages, they are ideal for many troubleshooting, commissioning, and preventative maintenance applications.
    Additional features, like the remote probe on these tools save both time and money when performing tests.



    “Contact us to know about more models under this category”
  • Digital Multimeter : Fluke 233


    Overview:
    The new Digital Multimeter with True RMS Fluke 233 Remote Display allows maximum flexibility in demanding measurement environments. Place the removable display where you can see it and then place the multimeter at your convenience: no more juggling the leads and the meter while stretching into tight spaces. You can now take measurements in hard to reach places, where machines or electric panels are physically separated from the limit switch or isolation, or in areas where access is restricted to users as clean rooms or hazardous areas.



    “Contact us to know about more models under this category”
  • Air Meters : Fluke 985 Particle Counter


    Take a new look at indoor air quality.
    The Fluke 985 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 985 is the portable solution for determining airborne particle concentrations. Use the Fluke 985 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program.

    With the Fluke 985, you can:
    • Measure filter efficiency
    • Monitor industrial cleanrooms
    • Pre-screen indoor air quality and confidently work with IAQ specialists
    • Locate particle sources for remediation
    • Report the effectiveness of repairs to customers
    • Drive additional business by demonstrating the need for maintenance and repair

    With a large screen, intuitive icons for navigation and on-screen data presentation, the Fluke 985 allows users to run more tests quickly, with less time spent cycling through screens to obtain the data. The Fluke 985 is lightweight and easy to use in any position and with easy data export options using USB cable, memory stick it’s easy to review and analyze the data anywhere and anytime.



    “Contact us to know about more models under this category”
  • Thermal Imagers : Fluke Ti100


    Overview:
    The lightest, most rugged and easiest-to-use professional thermal imager has now arrived. Perform infrared inspections faster and more efficiently with the Ti100 Thermal Imager.

    Features:
    • Rugged, lightweight, point-and–shoot focus-free thermal imager
    • Laser pointer to assist in showing where problems exist

    Spend less time finding problems and more time solving them with the innovative, rugged and easy to use Ti100 General Use Thermal Imager.



    “Contact us to know about more models under this category”

Predictive Maintenance &
Calibration Tools


  • Vibration Tester : Fluke 810


    Overview:
    Control unplanned downtime, prevent recurring problems, set repair priorities and manage your resources with an entirely new approach to vibration testing.
    The new Fluke 810 Vibration Tester is the most advanced troubleshooting tool for mechanical maintenance teams who need an answer now. The unique diagnostic technology helps you quickly identify and prioritize mechanical problems, putting the expertise of a vibration analyst in your hands.
    You take pride in your facility, your team, and your work. You do what it takes to keep things up and running, but sometimes there is not enough time or resources to keep up with the workload, let alone be proactive about mechanical maintenance. The Fluke 810 Vibration Tester puts you one step ahead by using a simple step-by-step process to report on machine faults the first time measurements are taken, without prior measurement history. The combination of diagnoses, severity and repair recommendations help you make informed maintenance decisions and address critical problems first



    “Contact us to know about more models under this category”
  • Insulation Testers : Fluke 1555


    Overview:
    The 1555 and redesigned Fluke 1550C insulation resistance testers, offer digital insulation testing up to 10kV, making them ideal for testing a wide range of high voltage equipment including switch gear, motors, generators and cables. Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating. With measurement storage and PC interface, the 1555 and 1550C are perfect tools for preventative or predictive maintenance programs designed to identify potential equipment failures before they occur.



    “Contact us to know about more models under this category”
  • Thermal Imager : Fluke TI 32


    Overview:
    Built for top professionals, the Ti32 is a tool you can use everywhere, from troubleshooting actual defects to spotting potential failures during regular service and maintenance. With its superior image quality, optional lenses, field-swappable batteries and intuitive user interface, the rugged Ti32 is ideal for busy, front line engineers who are always on the go.



    “Contact us to know about more models under this category”
  • Power Quality Analyzer : Fluke 434


    Overview:
    The Fluke 434 II Energy Analyzer is the ideal tool for energy logging. Utilizing the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality. This energy monetization capability allows you to identify the most energy-wasteful areas of your facility so you can determine potential energy saving solutions. Add basic power quality measurements to the package and you’re got yourself one powerful troubleshooting tool.

    Applications

    • Energy monetization – calculate the fiscal cost of energy waste due to poor power quality
    • Energy assessment – quantify the before and after installation improvements in energy consumption to justify energy saving devices
    • Frontline troubleshooting – quickly diagnose problems on-screen to get your operation back online
    • Predictive maintenance – detect and prevent power quality issues before they cause downtime
    • Long-term analysis – uncover hard-to-find or intermittent issues
    • Load studies – verify electrical system capacity before adding loads



    “Contact us to know about more models under this category”
  • MA Process Clamp Meters : Fluke 773


    Overview:
    Save time by NOT breaking the loop on 4-20 mA signal measurements.
    Are you spending time:
    • Taking mA measurements by removing a wire and breaking the loop
    • Calling the control room to isolate a loop
    • Testing analog input/output on a console
    • Troubleshooting devices with mA inputs and outputs
    • Repairing intermittent or erratic 4-20 mA loops
    • Going back to the shop to get extra tools
    If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.



    “Contact us to know about more models under this category”
  • Pressure Calibrators


    The complete solution to pressure calibration
    The Fluke 718 pressure calibrator family (includes 4 models) provide a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field



    “Contact us to know about more models under this category”
  • Process Calibrators : Fluke 753


    Overview:
    The 753 is everything you needed and wished for in the 743B and more!
    The 753 does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. You'll fall in love with the new improved graphical screen, Li-on battery for longer life, USB port and new accessories to complete the package.
    For documentation, the 753 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.
    The Fluke 753 Documenting Process Calibrator: Work smarter. Work faster.



    “Contact us to know about more models under this category”
  • Earth Tester: Fluke 1625


    Overview:
    The Fluke 1623 and 1625 are distinctive earth ground testers that can perform all four types of earth ground measurement. Specifically, the Fluke 1623 and 1625 testers are able to measure earth ground loop resistances using only clamps – called Stakeless testing. This method doesn’t require the use of earth ground stakes or the disconnection of ground rods.
    Testing Methods

    •3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
    •Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
    •Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.

    The Fluke 1625 offers these advanced features

    •Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
    •R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
    •Adjustable limits – for quick test result verification.



    “Contact us to know about more models under this category”
  • Vibration Meters : Fluke 805


    Overview:

    The reliable, repeatable, accurate way to check bearings and overall vibration.

    Make go or no-go maintenance decisions with confidence. The Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

    What makes the 805 the best choice?

    • A meter – not a pen – that measures overall vibration as well as specific variables like bearing condition and temperature, to provide a more complete picture.
    • A combination vibration and force sensor tip that compensates for user variance (force or angle) yielding accurate, repeatable readings.
    • A four-level severity scale and onboard processor calculate bearing condition and overall vibration using easy-to-understand textual alerts (Good, Satisfactory, Unsatisfactory, Unacceptable).
    • Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz) covering most machine and component types.
    • Straight-forward user interface that minimizes the user inputs to RPM range and equipment type.



    “Contact us to know about more models under this category”

  • Contact Us for more infromation / quotation of the above products:

    Newtech Instruments (India) Pvt.Ltd.

    3&4, Upper Floor, Ghanti Building,
    Bhuvaneshwari
    Nagar, Keshwapur,
    Hubli-580023
    (India).

    Phone   : 0836-2282677, 2282577, 2283377

    Fax    : 0836-2285577

    E-mail   : sales@newtechinstrumentsindia.com

    Website: www.newtechinstrumentsindia.com